Custom builds or can fit Steiney XQ/Q basses
This neck is based on the model produced by Moses for Music Yo in the early nineties. It should fit Steinberger Q5, XQ5 and XM5 basses from that time period. Features include: - 24 levelled stainless steel frets - Double action truss rod (accessed through the string clamp end) - Custom string clamp that accepts single ball end strings - Monocoque construction (a hollow shell) with resin core - Polyeurathane finish - Five M5 carbon steel neck bolts and threaded inserts are included. Widths @ zero fret: 45.3mm @ 12th fret: 59.8mm@ 24th fret: 67.5mm Depths (front to back): @ zero fret: 19.57mm @ 12th fret: 22.2mm @ 24th fret: 26.75mm Neck heel: 75mm length allowed for.
This neck is based on a pre-Music Yo 4 string neck likely from the late eighties. Our neck features a custom string clamp which can accept single or double ball end strings and truss rod adjustment accessed at the clamp. 24 levelled stainless steel frets Double action truss rod (accessed through the string clamp end) String clamp that accepts single ball end strings Monocoque construction (a hollow shell) with resin core Matt polyeurathane finish Neck inserts and matching bolts supplied Widths: @ zero fret: 39mm @ 12th fret: 51mm @ 24th fret: 53.5mm Depths (front to back): @ zero fret: 19.85mm @ 12th fret: 22.6mm @ 24th fret: 25.6mm Fingerboard radius: 405mm Neck heel length to shoulder: 88.5mm NB: The standard Steinberger neck heel butt is slightly curved from the fingerboard side to the rear of the neck heel. Our neck heel butt is flat. The product shown in the photos is the HL5 neck for illustrative purposes only, pending completion of the HL4 neck product photography.